How to Install LED wall washer, LED wall washer manufacturers Lembeh photoelectric share with you, usually at night, many buildings will have exterior lights, the lights and the walls washed out like this is the LED wall Washer. More and more buildings have in use LED wall washer, but a lot of friends do not understand the method of its installation, so today LED wall washer manufacturer LED Wall Washer tells you how to install.

  1, the first power line welded aluminum plate positive and negative poles, and then tied with tape and implement the two plastic irrigation. Glue should pay attention to their flat, do not appear crooked or the phenomenon.

  2, if it is in the morning, then potting afternoon bags can be removed, if it is in the afternoon Glue the next day, then you need to remove, and then hit the glass and then install the installation of two wall washer blocked.

  3, when the LED wall washer is installed on after wiring, the outgoing interface is the best male and female plug, so installation is more convenient.

  4, prior to installation, you should first LED lamp beads use to the tin soldering iron and the aluminum plate spare.

  5, after the soldered should check, see if it can be used normally, avoiding welding or there is not no good light phenomenon.

  6, after checking in to the back of the aluminum substrate needs marked cooling gel, and then the board on the housing.